COMMUNICATION & POWER TRANSMISSION SAFETY AND RIGGING SUPPLIES

Cable Ratchet Winch Hoists | Web Strap Winch Hoists

COMPRESSION SLEEVES FOR AIRCRAFT CABLES

 

WE STOCK THE FOLLOWING LUG ALL MODELS          

2250-15sh

3000-10sh

3000-30sh

4000-20sh

2-IN-1 STABLE BRAID ROPE

Dia. (inches)
Circ. (inches)
Weight (Lbs)
Strength Average (Lbs.)
100-Ft.
100 Fms
1/4
3/4
2.1
12.6
2,300
5/16
1
3.2
19.2
3,600
3/8
1-1/8
4.5
27.0
5,600
7/16
1-1/4
6.1
36.6
7,700
1/2
1-1/2
8.2
49.2
10,400
9/16
1-3/4
11.0
66.0
13,300
5/8
2
14.0
84.2
16,300
3/4
2-1/4
18.0
108.0
20,400
7/8
2-3/4
27.1
162.6
29,900
1
3
34.0
204.0
39,200

 FULL SERVICE SPLICING AND INSPECTIONS WHILE YOU WAIT

DOES YOUR COMPANY OWN PULLING RIGS? WE WILL BE HAPPY TO PULL OFF ALL OF THE ROPE, INSPECT IT, MEASURE IT, SPLICE AS NEEDED AND REPLACE IT ON THE MACHINE TO FIT YOUR TIME SCHEDULE!!!

 

WE STOCK A VARIETY OF CROSBY RIGGING PRODUCTS:

-HOOKS, TURNBUCKLES, SHACKLES, CLIPS, BLOCKS, EYE BOLTS, SWIVELS,

 BINDERS, CHAIN AND WIRE ROPE FITTINGS

CLICK HERE TO LEARN MORE ABOUT THE CROSBY PRODUCTS WE CARRY

O.S.H.A. APPROVED ALLOY CHAIN SLINGS

CLICK HERE TO VIEW OUR CHAIN SLINGS

 7g7.GIF (1525 bytes)

TOOL BAGS

leather bottom bucketExtra Large canvas utility bag

                

** SEE AND HEAR A TUFF EDGE WEB SLING BEING BROKEN ON OUR PROOF TESTING MACHINE**

CLICK HERE

 

       

TUFF EDGE WEB SLINGS

 

 

 

TUFLEX ROUND SLINGS

 

WIRE ROPE SLINGS

  

 

1 LEG WIRE ROPE SLINGS

2 LEG WIRE ROPE SPREADERS     

3 LEG WIRE ROPE SPREADERS

4 LEG WIRE ROPE SPREADERS

HAND LINE BLOCKS

 
1. Swivel eye is made of high strength forged steel and is fastened to head with welded nut for positive security.
2. Two 5/16" steel roll pins, capped with tinner rivets, are used in closed head blocks.
3. The open head block has one 5/16" steel roll pin, capped with tinner rivets, and one 5/16" steel detente pin. The detente pin is secured with a welded steel chain.
4. The 3" free running sheave is machined to exacting tolerances for greater lifting efficiency. The shielded ball bearings are permanently lubed with a rating of 1250Lbs.
5. Frame, head, and sheave are cast from high strength A-356- T6 Aluminum Alloy.
6. 5/8" diameter steel axle is secured in frame by steel drive pins driven through each end of axle. Pins are positioned by recessed slots in frame to prevent rotation of axle
7. Body frame halves are riveted together with a 1/4" drive pin and capped with tinner rivets. 

HLB-1250 HAND LINE BLOCK

HOME